97 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ disclaimer: us.tdk-lambda.com/lp/legal.htm SWS300A-600 series features u lower cost u active power factor correction u universal input (85 - 265vac) u input transient protected iec61000-4 u enclosed u global safety approvals u level b emi single output general purpose power supplies model SWS300A sws600 input voltage range (1) - 85 - 265vac (47 - 63hz) or 120 - 370vdc inrush current (115 / 230vac) a 20 / 40 power factor - meets en61000-3-2 input current (100/200vac) a 3.6 / 1.8a 7.2 / 3.6a temperature coef? cient - <0.02%/c overcurrent protection - >105%, constant current style overvoltage protection v yes, cycle ac to reset overtemperature protection - yes, cycle ac to reset hold up time (typ) ms 20ms at 115/230vac leakage current (max) ma sws300: 0.75ma , sws600: 1.5ma remote sense - none yes parallel connection - none yes remote on/off - none yes ac fail signal - none yes, open collector output led indicator - green led = on operating temperature c -10 to +65c (see table for derating - model speci? c) storage temperature c -30 to +85c humidity (non condensing) - 30 - 90% rh operating, 10 - 95%rh non operating storage humidity (non condensing) - 10 - 95% rh cooling - internal fan withstand voltage - i/p to grnd 2kvac, i/p to o/p 3kvac, o/p to grnd 500vac, o/p to cnt 100vac for 1 min isolation resistance - >100m at 25c & 70%rh, output to ground 500vdc vibration (non operating) - 10 - 55hz (sweep for 1 min)19.6m/s 2 constant x, y, z 1 hour each plane) immunity - en61000-4-2, -3, -4, -5, -6, -8, -11 safety agency approvals - ul60950, csa60950, en60950, en50178, ce mark conducted & radiated emi - en55011 / en55022-b, fcc class b recommended emi filter - rsal2006 rsan2010 weight (typ) g 950 2000 size (wxhxd) in 2.05 x 4.01 x 7.8 3.62 x 4.72 x 7.48 warranty yrs two years (1) derate linearly to 85% load from 115vac to 85vac input (derate to 90% load for sws600-3 & -5) speci? cations key market segments & applications
98 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision a3: feb 2012 SWS300A-600 series for additional information, please visit us.tdk-lambda.com/lp/products/sws-series.htm hws 15w to 1500w single output, high reliability sws 50 - 1000w single output zws 5 - 240w pcb style single, output (2) peak rating of 120a for 10s (3) 115/230vac other industrial products adjust max load line ripple eff. model voltage range curr. (a) reg (mv) reg (mv) noise (mv) (typ)%(1) SWS300A-3 3.3v 2.97 - 3.96v 55a 40 20 120 69 / 72 SWS300A-4 4v 3.6 - 4.8v 55a 40 20 120 72 / 75 SWS300A-5 5v 4.5 - 6v 55a 40 20 120 75 / 78 SWS300A-7r5 7.5v 6 - 9v 40a 60 30 120 77 / 80 SWS300A-12 12v 9.6 - 13.2v 26a 96 48 120 79 / 83 SWS300A-15 15 13.2 - 18.6v 21a 120 48 120 80 / 84 SWS300A-24 24v 20 - 28.8v 13a 120 48 150 82 / 85 SWS300A-28 28v 22.4 - 33.6v 11a 140 56 150 83 / 86 SWS300A-36 36v 28.8 - 40v 8.8a 180 72 200 83 / 87 SWS300A-48 48v 40 - 57.6 6.7a 240 96 240 83 / 86 sws600-3 3.3v 2.97-3.96v 100 (2) 40 20 100 69/71 sws600-5 5v 4.5-6v 100 (2) 40 20 100 74/77 sws600-12 12v 9.6-13.2 50 96 48 120 78/81 sws600-15 15v 13.2-18v 40 120 48 120 80/83 sws600-24 24v 20-28.8 25 120 48 150 81/84 sws600-36 36v 28.8-40v 16.7 180 72 200 81/85 sws600-48 48v 40-57.6 12.5 240 96 240 82/85 model 50c 55c 60c 65c SWS300A 100% 91.6% 83.3% 50% sws600 100% 85% 70% 55% suf? x descriptor /co2 double sided conformal coating model selector outline drawing (SWS300A) derating options
|